Home >Products > OPTIONAL ACCESSORY

OPTIONAL ACCESSORY

Option parts are various optional products that can enhance functions and performance by combining with AMERICAN DENKI products.
Available to view product information, download product PDF drawing sheets and specification sheets.

Lineup

SCREW

It is a fixing screw to mount wall plates or devices.

SCREW & CAGE NUT

It is a set of mounting screws and cage nuts for attaching 1U rack mount power distribution unit series or rack mount power distribution unit series to 19 inch racks.

ADAPTER

It is an available accessory used for interconnecting non-mating devices or converting an existing device to a new or modified use.

MAGNET

It is an available accessory to attach Power Strip Series and attract such as steel desks.

CRIMP TERMINAL

It is a crimp terminal suitable for crimp terminal connectable device.

FE TERMINAL

The available accessory for cooper single-wire such as VVF cable attachable to Multiuse Power Strip series.

OUTLET COVER

It is a outlet cover to shield a vacant outlet and prevent any foreign matter from getting inside.

PROTECTION CAP

It is a protective cap to cover the screw-end of metal grip and prevent users or machines from injuries.

BUSHING TUBE

Heat shrinkable tubes are used to seal cord openings of waterproof plugs and connector body, ensuring waterproof properties.

ACCESSORY for 100A DEVICE

It is a bushing and crimp terminal ideal for connecting 22mm² or 38mm² cable to 100A devices.

STICKER

It is a sticker that can be used depending on the application such as rating display.

INSULATION COVER

It is a cover for safety protection to avoid exposing the charging part (wiring part) of the appliance.

CONNECTION TERMINAL PLATE

It is a connection terminal plate instead of the connecting wire assembled by the crimp-style terminal at both end suitable for the two or more 15A panel mount duplex outlet. It contributed to the improvement in workability and reduction in cost.

COVER

It is a waterproof cap, attachable to a waterproof plug or waterproof connector body, having waterproof performance of IP65(International Protection Code) when not in use.
And it is a cover attachable to a flanged inlet to keep out dust.

WATERPROOF COUPLER

It is a coupling part that can be upgraded to waterproof type instrument by using it for the connection part between plug and connector body.

PLUG with CABLE

It is a cord set product with various plugs which makes it possible to shorten the work process. Crimp terminal processing is applied to the terminal end.

MOUNTING BRACKET

It is a bracket that can change the installation position when various Rack mount PDUs are installed in a 19-inch rack.

CORD CLAMP

It is a cord clamp for plug fixing to prevent unexpected dropout when IEC C-14 or IEC C-20 plug is used.

CABLE

It is an electrical conductors within a protective sheath, usable for power strip series.

EXPOSED SWITCH BOX

It is an exposed switch box for one or two gang for which a receptacle can be installed.

WATERPROOF MULTI BOX

It is a electrical enclosure to mount various receptacles.
It has waterproof performance of IPX5 (International Protection Code) when subjected to suitable waterproof finishing and used waterproof plate.

BLACK PACKING

It is possible to change the color of packing attached to waterproof flanged inlet (dust & jet proof) to black, according to the color of the mounting surface such as wall and panel board.