Expert of wiring devices such as Twist Locking Receptacle and Plug.
Google Custom Search
Home >Products >WATERPROOF WIRING DEVICE > WATERPROOF CONNECTOR BODY 20A
Waterproof Connector Body is a portable socket used to relay wires and can be used outdoors or in places where it may be exposed to water. When connected to our Waterproof Plug, it is an IP65-compliant product that is protected against dust and water jets from all directions.
They are used not only outdoors where they are exposed to rainwater, but also indoors in places where a high level of waterproofing, dustproofing and safety is required, such as in factories and food processing workshops where water and dust may scatter, and in clean rooms where absolutely no dust is permitted.
The material of the main body is made of flame-retardant (UL94 V-0) nylon resin which possesses heat resistance and tracking resistance and contains no harmful substances and the housing is made of high grade chloroprene rubber excellent in weather resistance and durability.
By combining with a waterproof connector body 4222RW, it is possible to obtain dust proof and waterproof performance.
By covering the cable entry with a insulation cover (heat shrinkable type), waterproof performance can be improved.
Wiring method is "Crimping terminal" tightening the terminal screw on the side.
The grip that holds cable is made of polycarbonate resin with flame retardancy UL 94 V-0 specification, which makes it hard to scratch equipment, floor and wall.
Pass the cable through the grip and heat shrinkable tube in advance, connect wires to the body and mount the housing, cover the cable opening area with the heat shrinkable tube and shrink it using an industrial dryer or similar device, taking care to avoid damaging the cable. The shrinkage temperature of the tube is 130℃, the shrinkage starts from 50-60℃ and the tube shrinks to about of 1/2 of the indicated size. Finally, tighten the grip screw above the heat shrinkable tube to fix it.
This waterproof cover can be placed over the outlet of a Waterproof Connector Body to keep it dust-proof and waterproof when not in use.
It is an IP65 compliant product that is protected against dust and water jets from all directions.
WK203: Waterproof Cover for 20A Waterproof Connector Body (2P 3W GND or 3P)
WK204: Waterproof Cover for 20A Waterproof Connector Body (3P 4W GND)
Catalog No. | Configuration | RatingSpecification | Product NameSpecification | Color | Note |
---|---|---|---|---|---|
3214RW-L5 | ![]() Twist Locking |
2-Pole 3-Wire Grounding 20A 125V (NEMA L5-20) | Waterproof Connector Body | Black | Rubber Housing |
3224RW-L6 | ![]() Twist Locking |
2-Pole 3-Wire Grounding 20A 250V (NEMA L6-20) | Waterproof Connector Body | Black | Rubber Housing |
3244RW-L8 | ![]() Twist Locking |
2-Pole 3-Wire Grounding 20A 480V (NEMA L8-20) | Waterproof Connector Body | Black | Rubber Housing |
3224RW | ![]() Twist Locking |
3-Pole 3-Wire 20A 250V | Waterproof Connector Body | Black | Rubber Housing |
4224RW | ![]() Twist Locking |
3-Pole 4-Wire Grounding 20A 250V | Waterproof Connector Body | Black | Rubber Housing |
4244RW-L16 | ![]() Twist Locking |
3-Pole 4-Wire Grounding 20A 480V (NEMA L16-20) | Waterproof Connector Body | Black | Rubber Housing |