Twist Locking Wiring Devices - AMERICAN DENKI

The material of the main body and the housing are made of flame-retardant (UL94 V-0) nylon resin which possesses heat resistance and tracking resistance and contains no harmful substances.
The material of the grip also made of flame-retardant (UL94 V-0) nylon resin.
Wiring method is "Crimping terminal" tightening the terminal screw on the side.
It is possible to connect not only 2PNCT/VCT2mm² wire but also 3.5mm² wire, which is one size larger. It is ideal for reducing current loss or for preventing voltage drops when long distance wiring is required.
The clamp grip (wire retaining part) has waterproof performance, and when combined with the Cord Connector Body 2112N and Waterproof Coupler Z0351, it can be used as a device with IP64 waterproof performance when in use.

The material of the main body is made of flame-retardant (UL94 V-0) nylon resin which possesses heat resistance and tracking resistance and contains no harmful substances and the housing is made of high grade chloroprene rubber excellent in weather resistance and durability.
By combining with a waterproof connector body R102, it is possible to obtain dust proof and waterproof performance.
By covering the cable entry with a insulation cover (heat shrinkable type), waterproof performance can be improved.
Wiring method is "Crimping terminal" tightening the terminal screw on the side.
The grip uses a stainless steel round band that is highly corrosion resistant and can securely fasten the cable.

Pass the cable through the grip and heat shrinkable tube in advance, connect wires to the body and mount the housing, cover the cable opening area with the heat shrinkable tube and shrink it using an industrial dryer or similar device, taking care to avoid damaging the cable. The shrinkage temperature of the tube is 130℃, the shrinkage starts from 50-60℃ and the tube shrinks to about of 1/2 of the indicated size. Finally, tighten the grip screw above the heat shrinkable tube to fix it.