Home >Products >WATERPROOF WIRING DEVICE > WATERPROOF LIFT COVER PLATE FOR RECEPTACLE

WATERPROOF LIFT COVER PLATE FOR RECEPTACLE

The waterproof lift cover plate is a openable cover plate for L-shaped plugs with a simple locking system that is difficult to open even under impact or vibration.
The cover can be opened and closed even when in use. When the cover is fully closed, It will be equivalent IPX3 rainproof.
AMERICAN DENKI’s Wall Plate Series will satisfy your needs because of the highest quality and variety of products.

Product Information

By mounting using the outlet mounting hole, it functions as a cover plate with IPX3 waterproof performance. Furthermore, it is possible to make the mounting stronger by using a knockout type four-point mounting hole. In addition, the installation of a four-point stop enables the installation of a panel receptacle.
When in use, the cover can be stopped at the fully open position (120 °). When fully closed, it can be locked easily so that it does not open easily due to vibration. To prevent unintentional opening and closing of the cover, the cover and the main body can be fixed using the locking holes and padlocks on both sides of the cover.
The plate body and cover material has heat resistant and tracking resistant., and uses a flame-retardant (UL94 V-2 or higher) ultra high strength resin polycarbonate that does not contain harmful substances.
The plate body and cover are made of flame retardant (UL94 V-2 or higher) ultra high strength resin polycarbonate, which has heat resistant and tracking resistant.

The cover is clear molded in brown, so you can check the connection status of the L-shaped plug even when it is closed.

With lockable keyhole

There are holes on both sides of the plate and the opening cover for attaching a padlock.

Prevents dust from entering when not in use

The included rubber blank piece can be put in the insertion slot on the bottom of the cover to close the opening when the L-type plug is not connected (equivalent to dust and waterproof protection IP44).

Product introduction video

Lineup

Catalog No. Configuration RatingSpecification Product NameSpecification Color Note
WLP3000 1-Gang 1-Receptacle, for 15A/20A Receptacle (Face Dia. φ34.5) WATERPROOF LIFT COVER PLATE FOR RECEPTACLE Brown (Clear Molded) for 1 Gang
with Plate Screw, LB-S Sticker (Rated Voltage Display)
WLP4000 1-Gang 1-Receptacle, for 20A/30A Receptacle (Face Dia. φ40.5) WATERPROOF LIFT COVER PLATE FOR RECEPTACLE Brown (Clear Molded) for 1 Gang
with Plate Screw, LB-S Sticker (Rated Voltage Display)
WLP5000 2-Gang 1-Receptacle, for 30A/50A/60A Straight Blade Type Receptacle (Face Dia. φ57) WATERPROOF LIFT COVER PLATE FOR RECEPTACLE Brown (Clear Molded) for 2 Gang
with Plate Screw, LB-S Sticker (Rated Voltage Display)