Home >Products >WATERPROOF WIRING DEVICE > WATERPROOF CONNECTOR BODY 15A

WATERPROOF CONNECTOR BODY 15A

Waterproof Connector Body is a portable socket used to relay wires and can be used outdoors or in places where it may be exposed to water. When connected to our Waterproof Plug, it is an IP65-compliant product that is protected against dust and water jets from all directions.
They are used not only outdoors where they are exposed to rainwater, but also indoors in places where a high level of waterproofing, dustproofing and safety is required, such as in factories and food processing workshops where water and dust may scatter, and in clean rooms where absolutely no dust is permitted.

Product Information

2114N 2-Pole 2-Wire 15A 125V Twist Locking Connector Body

The material of the main body and the housing are made of flame-retardant (UL94 V-0) nylon resin which possesses heat resistance and tracking resistance and contains no harmful substances.
The material of the grip also made of flame-retardant (UL94 V-0) nylon resin.
Wiring method is "Crimping terminal" tightening the terminal screw on the side.
It is possible to connect not only 2PNCT/VCT2mm² wire but also 3.5mm² wire, which is one size larger. It is ideal for reducing current loss or for preventing voltage drops when long distance wiring is required.
The clamp grip (wire retaining part) has waterproof performance, and when combined with the Cord Connector Body 2112N and Waterproof Coupler Z0351, it can be used as a device with IP64 waterproof performance when in use.

R104 2-Pole 3-Wire Grounding 15A 125V Twist Locking Waterproof Connector Body

The material of the main body is made of flame-retardant (UL94 V-0) nylon resin which possesses heat resistance and tracking resistance and contains no harmful substances and the housing is made of high grade chloroprene rubber excellent in weather resistance and durability.
By combining with a waterproof connector body R102, it is possible to obtain dust proof and waterproof performance.
By covering the cable entry with a insulation cover (heat shrinkable type), waterproof performance can be improved.
Wiring method is "Crimping terminal" tightening the terminal screw on the side.
The grip uses a stainless steel round band that is highly corrosion resistant and can securely fasten the cable.

How to attach Heat Shrinkable Tube

Pass the cable through the grip and heat shrinkable tube in advance, connect wires to the body and mount the housing, cover the cable opening area with the heat shrinkable tube and shrink it using an industrial dryer or similar device, taking care to avoid damaging the cable. The shrinkage temperature of the tube is 130℃, the shrinkage starts from 50-60℃ and the tube shrinks to about of 1/2 of the indicated size. Finally, tighten the grip screw above the heat shrinkable tube to fix it.

Waterproof Sealing Structure

IP65 WATERPROOF CONNECTOR BODY Introduction Video

Lineup

Catalog No. Configuration RatingSpecification Product NameSpecification Color Note
2114N
Twist Locking
2-Pole 2-Wire 15A 125V Connector Body (Nylon Housing) Black Nylon Housing
2114N-IV
Twist Locking
2-Pole 2-Wire 15A 125V Connector Body (Nylon Housing) White Nylon Housing
2124N
Twist Locking
2-Pole 2-Wire 15A 250V Connector Body (Nylon Housing) Black Nylon Housing
2124N-IV
Twist Locking
2-Pole 2-Wire 15A 250V Connector Body (Nylon Housing) White Nylon Housing
R104
Twist Locking
2-Pole 3-Wire Grounding 15A 125V Waterproof Connector Body Black Rubber Housing
3124RW
Twist Locking
2-Pole 3-Wire Grounding 15A 250V (NEMA L6-15) Waterproof Connector Body Black Rubber Housing
R105
Twist Locking
3-Pole 4-Wire Grounding 15A 250V Waterproof Connector Body Black Rubber Housing